NXS system
Nexus NXS System is available from Ø 20 mm to Ø 126 mm, and it is suitable to realize holes deep up to 6 m, accoridng to operative application conditions.
NXS System is composed by: core bit, extention rod and connection. NXS System drilling allows drilling even at considerable depths without the need to interrupt drilling to extract the core until desired depth is reached; just add rods to finish the hole.
NXS Segment thin thickness is an alternative to traditional pipe tubes for application with drilling lenghts longer than 450 mm.
The NXS System is a continuous core drilling system, with a segment thickness equal to traditional pipe tubes. Continuous core drilling allows drilling even at considerable depths without the need to interrupt drilling to extract the core until the desired depth is reached; just add rods to finish the hole.
They are composed of a series of components such as:
- The core bit is the tool to drill and is available in impregnated, technology.
- Rods allow you to extend drilling and contain the core.
- The connector is the accessory which connects rods and the driving shaft of drill machine.
These batteries are mainly used in construction to make holes for consolidation, tie beam actions, holes for the passage of diamond wire.
NXS impregnated core bit are available in the TAURUS line and are identified by the letter T, followed by a number that identifies the hardness and abrasion matrix resistance characteristics. The higher the number, the more "soft" the matrix is and consequently the more the tool is suitable for cutting hard materials. TAURUS Matrix series are designed for use with electric or hydraulic core drills. On request, Nexus designs and produces tools with special dimensions and matrices.
NXS SYSTEM DIMENSIONS Ø hole x cut thickness [mm]
Ø20 x 3.5 - Ø25 x 3.5 - Ø28 x 3.5 - Ø30 x 3.75 - Ø32 x 3.75 - Ø35 x 4.0 - Ø42 x 4.0 - Ø46 x 4.0 - Ø51 x 4.0 - Ø56 x 4.0 - Ø61 x 4.0
Ø66 x 4.0 - Ø72 x 4.25 - Ø76 x 4.25 - Ø82 x 4.25 - Ø92 x 4.25 - Ø102 x 4.5 - Ø112 x 4.5 - Ø122 x 4.5 - Ø126 x 4.5